Skip to content
Portland SEO & Web Design · Prices published from $450/mo · Month-to-Month, No Contracts · Founder-Led · (971) 280-2861

Roofing SEO Seattle: SDCI Reroof Answers, L&I Registration Lines and Moss Pages for King County Roofers

Roofing SEO Seattle at Portland Peak SEO means pages built on rules an owner can check: SDCI exempts a house reroof that leaves the envelope unchanged, commercial reroofs need a permit, and RCW 18.27.100 puts your registration number in ads. Plans run $450, $950 or $2,500 monthly.

Roofing SEO in Seattle is the work of making a roofing company’s site answer the questions a Wallingford homeowner or a Bellevue property manager asks before calling, from permits to moss to who carries the bond. Licensing, job pages and national search for roofers live on our roofing SEO pillar for licensed roofing contractors. There is no Portland Peak SEO office in Washington: each roofing account is run remotely, out of Lake Oswego, Oregon, for roofers around Puget Sound.

Written and maintained by Andreas Benavente, Founder, Portland Peak SEO · Updated October 26, 2026

SBC 106.2 ITEM 13 · RCW 18.27.100 · WSDA MOSS RULE · SEA-TAC NORMALS
3
ROOF JOBS SDCI LISTS AS PERMIT-EXEMPT
$15,000
BOND FOR A SPECIALTY CONTRACTOR
156.2
WET DAYS A YEAR AT SEA-TAC
$450
ENTRY PLAN, PER MONTH
SBC 106.2, ITEM 13

When does a Seattle reroof need an SDCI permit, and how should a roofing site explain the exemptions?

A house reroof usually does not. SDCI says no permit is needed at one- and two-family homes and townhouses if the building envelope stays unchanged apart from insulation of equal or better value. Commercial and multifamily reroofs need one. A Seattle roofer’s replacement pages from Portland Peak SEO state that difference in SDCI’s own terms.

Two SDCI documents carry the rule. The Re-Roof Permit page says: “You need a re-roof permit when you are repairing an area greater than 500 square feet or replacing roofing materials on commercial and multifamily projects.” The Roof Replacement affidavit, revised May 19, 2025, lists what Seattle Building Code 106.2 item 13 leaves out of the permit process.

The roof jobSDCI’s wordingHow the page handles it
Recover over the existing roof“Roof recover (install new roof cover over existing) => exempt from permit”An overlay page that cites the exemption and says when a tear-off is the better call
Replacement on a house, duplex or townhouse“Roof replacement for single family, duplex, or townhouse (SBC or SRC) => exempt from permit”The residential replacement page, with the envelope condition stated beside it
Small patches“Patching/replacement of roofing < 500 square feet in any 6 month period => exempt from permit”A repair page that explains the 500 square foot line
Commercial or multifamily replacement“You need a re-roofing permit if you are replacing the roof cover, sheathing, or insulation on commercial or multifamily projects.”A commercial page that walks through the permit and the closing affidavit

The exemption has a limit worth printing. SDCI adds that “You need a construction permit if your re-roofing work alters the building envelope in any way other than adding or replacing insulation at one- and two-family homes and townhouses.” A page about skylights, dormers or a roof deck should send the owner to that construction permit, not the exemption.

COMMERCIAL ROOFS AND R-VALUE

What does SDCI’s roof replacement affidavit ask a commercial roofer in Seattle to certify?

Either that insulation was not required, because sheathing or insulation stayed covered or the cavities were already insulated, or that a listed R-value went in: R-38 continuous above the deck, R-49 in attics, or R-25 plus R-22 on metal buildings. That checklist becomes the outline of a Portland Peak SEO commercial reroof page for Seattle roofers.

SDCI issues the permit when you apply online and says “An on-site inspection is not required for a re-roof permit.” The job closes once the completed affidavit is emailed to SDCI, and contractor disclosure information comes before issuance.

  • The certification line. The signer certifies “that the roof covering has been installed in accordance with the Seattle Building Code and the manufacturer’s instructions.”
  • The contractor fields. Contractor name, address and “Contractor License Number” sit on the form, so the number on your site should match the one on your paperwork.
  • The energy code clause. Section C503.3.1 says “In no case shall the R-value of the roof insulation be reduced or the U-factor of the roof assembly be increased as part of the roof replacement.”
  • The definition. Roof replacement is “The process of removing the existing roof covering, repairing any damaged substrate and installing a new roof covering.”

Roofers bidding that work for property managers will find more on our commercial roofing SEO page for low-slope and multifamily contracts.

CHAPTER 18.27 RCW

What must a Seattle roofing company’s ads, door hangers and website show under Washington contractor law?

The current L&I registration number, on any advertising that shows the company’s name or address and on every piece used to solicit homeowners directly. Truck signs, on-premises signs and airwave ads are carved out. On a Seattle roofer’s site, Portland Peak SEO puts the number in the footer, the quote page and every printable estimate template.

Roofing is one of the 63 specialties Labor and Industries registers.

ProvisionThe textWhere it lands on a roofing site
RCW 18.27.020(2)(a)It is a gross misdemeanor to “Advertise, offer to do work, submit a bid, or perform any work as a contractor without being registered as required by this chapter”No roofing page or ad goes live before the registration is active
RCW 18.27.100(3)(a)“All materials used to directly solicit business from retail customers who are not businesses shall show the contractor’s current registration number.”Storm-season door hangers and the printable estimate PDF carry the number
RCW 18.27.100(3)(a)“signs on motor vehicles subject to RCW 46.16A.030 and on-premise [on-premises] signs shall not constitute advertising as provided in this section”; “Advertising by airwave transmission shall not be subject to this subsection (3)(a).”Truck wraps and radio spots are exempt, yet the site they point to still shows it
RCW 18.27.100(4)“No contractor shall advertise that he or she is bonded and insured because of the bond required to be filed and sufficiency of insurance as provided in this chapter.”No “bonded and insured” badge resting on the state minimums alone

The bond and insurance behind a Washington registration

L&I’s registration page sets a “Washington Continuous Contractor Surety Bond in the amount of” $30,000 for general contractors and $15,000 for specialty contractors, and general liability of “$200,000 in public liability and $50,000 property damage, or $250,000 combined single limit.” RCW 18.27.040 sets the same bond amounts. The same L&I page says specialty contractors “can only perform work in the specialty they are registered in. They cannot hire subcontractors,” which matters to a roofer whose site lists gutters, siding or skylights.

FOUR SEASONS AT SEA-TAC

Which season gives Seattle roofing crews their dry stretch, by NOAA’s 1991 to 2020 normals?

Summer, by a wide margin. NOAA’s normals for Seattle-Tacoma International Airport put June through August at 3.02 inches across about 19 wet days, against 15.26 inches in winter. The year totals 39.34 inches over 156.2 days. Those seasons, not a guess, set when Portland Peak SEO refreshes a Seattle roofer’s replacement and leak pages.

Season, Sea-TacNormal precipitationWet daysWhat the site should have live
Winter (Dec to Feb)15.26 in.53.0Leak repair, emergency tarping, storm damage documentation
Spring (Mar to May)9.23 in.43.4Replacement estimates and financing, booked for summer
Summer (Jun to Aug)3.02 in.18.8Tear-off galleries from current jobs, commercial reroof scheduling
Fall (Sep to Nov)11.83 in.41.0Gutter and flashing checks, moss treatment before the wet months

Sources: NOAA NCEI 1991 to 2020 monthly normals and seasonal and annual normals for station USW00024233, Sea-Tac. Seasonal day counts are our sum of NOAA’s monthly averages, and the last column is our recommendation. November is the wettest month at 6.31 inches and July the driest at 0.60, so refresh the leak page in October.

MOSS, ZINC AND THE PESTICIDE LICENSE

What can a Seattle moss removal page say, and who may apply moss killer on a customer’s roof?

Hand removal and zinc strips can be described from university sources. Chemical treatment is different: WSDA says applying pesticides to another’s property “requires the Commercial Applicator License.” Portland Peak SEO builds a Seattle moss page around only the methods your company is licensed to offer.

The University of Washington’s Miller Library, answering a Plant Answer Line question on roof moss removal, quotes an Oregon State University bryophyte page: zinc strips “are considered to be effective for up to one year for most brands,” and “Physical removal of existing moss followed by installation of zinc strips or flashing is an effective long-term strategy for suppressing moss growth.” It warns that runoff “to surrounding vegetation, fish ponds, or water supplies should be avoided,” and the librarian calls cleaning moss off physically “most environmentally sound.”

WSDA’s unlicensed applicator fact sheet, written for landscape maintenance firms, gives an unlicensed company three options: obtain the license, “Subcontract your pesticide work to an appropriately licensed company,” or stop offering pesticide applications. The sheet says a company needs the license even if it “performs moss control to roofs or lawns, even once to a client’s property,” and its definition of pesticides includes “moss control agents.”

  • Hand removal page. Brushing or scraping, with your crew’s roof-safety practice described in your words.
  • Zinc strip page. Installed along the ridge, with the runoff caution and a note on how long strips last.
  • Treatment page. Only with your WSDA license number on it, or naming the licensed company you subcontract to.
DETACHED HOUSES, CITY BY CITY

Which King County cities hold the most detached houses for a Seattle-area roofing company?

By count, Seattle, with 143,530 detached single-family units in the Census Bureau’s 2024 survey. By share, Sammamish, where 79.8% of housing is detached, against 34.9% in Seattle. Portland Peak SEO uses those shares to rank which suburb pages a Seattle roofing company should write first, alongside the job records the company already has.

Downtown Seattle towers and the Space Needle seen across Elliott Bay, with a sailboat and a cruise ship on the water, Seattle, Washington
Downtown Seattle from Elliott Bay (photo: Joe Mabel, September 2016, via Wikimedia Commons, CC BY-SA 4.0).
CityHousing units1-unit, detachedOwner-occupiedBuilt 1950 to 1959
Seattle411,67134.9%41.9%7.8%
Sammamish21,33179.8%80.0%0.6%
Shoreline27,92358.3%60.7%22.7%
Kent49,95254.7%58.8%3.9%
Renton41,33751.5%56.0%8.3%
Kirkland41,91050.0%56.8%2.8%
Bellevue69,03943.2%48.9%10.3%
Redmond38,24033.6%40.2%0.8%

Source: the Census Bureau’s 2024 ACS one-year housing profiles (DP04) by city, for example Seattle, Sammamish and Shoreline. Shoreline stands out, with more than a fifth of its homes built in the 1950s, the highest share in the table.

Seattle’s exemptions belong to Seattle’s code, so a Kent or Bellevue page cites that city’s own permit rules rather than SDCI’s. Inside the city, neighborhood pages for West Seattle, Magnolia, Wedgwood or Rainier Beach earn their place only when your job records there give each page its own photos and roof types.

KING COUNTY’S ROOFING EMPLOYERS

How many roofing contractors does BLS count in King County?

For 2024, BLS counts 206 private roofing contractor locations in King County, averaging 1,697 jobs, two more locations than in 2023 and 66 fewer jobs. Of those, 184 are residential roofers averaging about six jobs each. To Portland Peak SEO, that reads as a crowded small-crew field where specific pages separate one roofer from the next.

Roofing in King County, 2024 (private)EstablishmentsJobs, annual averageWeekly wageJobs per establishment
Roofing contractors (23816)2061,697$1,4398.2
Residential roofing (238161)1841,119$1,2966.1
Nonresidential roofing (238162)22578$1,71726.3

Data: BLS QCEW, King County annual averages for 2024, private ownership, with BLS’s over-the-year change for the year-earlier comparison. Jobs per establishment is our division of the two columns. Roofers headquartered in neighboring counties who take Seattle jobs fall outside these rows, so the field for King County roofing SEO is wider than the table shows.

THREE TIERS

How much do roofing SEO services in Seattle, Washington cost with Portland Peak SEO?

The entry Local tier is $450 a month, Growth is $950 and Authority $2,500, none with a setup charge or a notice period. A roofer selling inside Seattle fits Local; one adding Shoreline, Kirkland, Renton and Kent fits Growth’s limit of five target locations; a regional residential and commercial operation fits Authority’s wider targeting.

Ready to start? Buy the Local plan ($450 a month), the Growth plan ($950 a month) or the Authority plan ($2,500 a month) online, month to month with no contract, or ask for the free audit first.

Local, $450

One market, one service focus. Seattle example: replacement, repair and moss pages for city addresses, using some of the 7+ high-value SEO pages Local includes.

Growth, $950

Ten or more SEO pages, target locations capped at five. Seattle example: city pages for the strongest suburbs in the table above, each with its own permit source.

Authority, $2,500

Regional or national targeting with 20+ SEO pages. Seattle example: commercial reroof pages, multifamily accounts and several counties at once.

“Each tier includes the same methods,” reads our pricing page, so a bigger plan widens scope without changing care, and a monthly written report comes with each one. Roofing marketing in Seattle beyond organic listings can include Google and Meta ads management at $300 a month. Hand-coded website builds begin at $2,200, paid once. Portland Peak SEO does not handle social media management.

Map pack mechanics for roofers anywhere, from Business Profile categories to reviews, sit in our separate guide to local SEO for roofing companies and contractors, which keeps this page on Seattle.

BEFORE YOU HIRE

What should a Seattle roofer check before hiring a roofing SEO company from out of state?

Who writes the pages, where each permit and license claim comes from, and what the contract allows. At Portland Peak SEO the founder, Andreas Benavente, does the work, each permit and license rule is written with a link to SDCI, L&I or the RCW, and plans run month to month. Your crew supplies the photos and job details.

Founded in 2015, the firm serves 20+ clients, and the ones who agreed to be named are on our case studies page. No one from the firm comes to Seattle job sites, which is why the roof photos, crew names and service area on your pages come from you.

Expect first movement in the 90 to 180 day range the pricing page names, never a promised position, with weekly rank tracking from the first week so a slow month is visible as one. A roofing SEO company in Seattle or anywhere else should be able to tell you the same about its own terms.

CLIENT REVIEWS

What do Google reviews say about the firm offering roofing SEO in Seattle?

Our Google Business Profile showed a 5.0 rating from 4 Google reviews when we read it on October 23, 2026. Two of those reviews appear below word for word, one from Michael Richardson of MGI, a construction and environmental services firm, and one from Jacob Levin of Jacob Levin Law, a law firm in Redding, California, with each reviewer's name as Google shows it. Neither reviewer runs a roofing company. Every review, and the current count, is also on our Google Business Profile.

★★★★★

“5 star service. Whenever we need changes on our website Andreas calls us back Immediately. The AI skills are top notch. They made our website stand out and get noticed.”

Michael Richardson · MGI · Google review

★★★★★

“Andreas is a wizard with rankings. His websites are amazing, his communication is superb. Cannot recommend enough.”

Jacob Levin · Jacob Levin Law · Google review

These are clients' own words, so we have not edited them. One client's experience, however, does not predict another's.

Andreas Benavente, founder of Portland Peak SEO, who would do the roofing SEO work for a Seattle account

Andreas Benavente, founder

Andreas does the search and page work on every account, from Lake Oswego, Oregon, and writes each monthly report, so the person you talk to is the person doing the work.

ROOFER QUESTIONS, SEATTLE EDITION

Which permit, licensing and marketing questions come up from Seattle roofers?

Seattle roofers ask how a commercial reroof permit closes, whether a recover needs a permit, what truck wraps and door hangers must show, whether “bonded and insured” is allowed, who can treat moss and what SEO for roofing companies in Seattle costs. The answers come from SDCI, the RCW, L&I, WSDA and NOAA, applied by Portland Peak SEO.

How does a Seattle commercial reroof permit get closed out?

By affidavit. SDCI says no on-site inspection is required; you fill out the Affidavit, Roof Replacement, and email it to SDCI’s inspections address. The form records the insulation installed and the contractor license number.

Is a roof recover over existing shingles exempt from a permit in Seattle?

Yes, by SDCI’s affidavit, which lists “Roof recover (install new roof cover over existing)” as exempt under Seattle Building Code 106.2 item 13. A recover that alters the building envelope beyond insulation needs a construction permit.

Does my roofing truck wrap have to show my L&I registration number?

Not under this section. RCW 18.27.100(3)(a) says signs on motor vehicles subject to RCW 46.16A.030 and on-premises signs are not advertising for this rule. The website the wrap advertises still shows the number wherever your name appears.

Do door hangers after a windstorm need my registration number?

Yes. Materials used to directly solicit business from retail customers who are not businesses, such as homeowners, must show the current registration number under RCW 18.27.100(3)(a). Put it on the hanger and on the landing page it sends people to.

Can my Seattle roofing ads say “bonded and insured”?

Not on the strength of the state minimums. RCW 18.27.100(4) bars a contractor from advertising that it is bonded and insured because of the bond and insurance the chapter requires. If coverage comes up at all, state what you actually carry, in figures you can document.

What can a roofing company with no pesticide license offer for moss?

Hand removal and zinc strips, or treatment through a licensed partner. WSDA lists three choices for unlicensed firms: get licensed, subcontract to a licensed company, or stop offering pesticide applications.

Can a specialty roofing contractor in Washington hire subcontractors?

No. L&I says specialty contractors can only perform work in the specialty they are registered in and cannot hire subcontractors, so a site listing siding or gutter installation needs registration that covers that work.

How many rainy days does Seattle get each year?

NOAA’s 1991 to 2020 normals for Sea-Tac average 156.2 wet days a year, counting any day with a hundredth of an inch or more, and 39.34 inches in total. Only about 19 of those days fall in June, July and August.

What does SEO for roofing companies in Seattle cost?

Portland Peak SEO prices roofing work at its standard tiers of $450, $950 and $2,500 a month, cancellable in any month. Scope decides the tier: how many cities and job types your Seattle-area pages need to reach.

FREE SEATTLE ROOFING AUDIT

Which parts of a Seattle roofing website does the free audit cover?

Technical health, on-page optimization, your backlink profile, keyword opportunity and a competitor comparison against the sites ranking above you, closing with a prioritized action plan, each item weighed by impact and effort. Andreas Benavente reads each request personally, and the form promises the report within 48 hours. Its on-page review includes whether your registration number appears.

On a roofing site, keyword opportunity can surface commercial reroof, recover or moss searches that no page on the site addresses. See every area on the free SEO audit page.

Thank you. Your request is in. We will email you within 48 hours.

No website yet? Leave this blank and tell us below what you need. Web design requests come through this form too.

Your information is secure. We also never spam or share your data.

RELATED ROOFING PAGES

Where should a Seattle roofing owner go after this page?

Up to Portland Peak SEO’s roofing SEO pillar, then across to the local SEO guide for roofers and the commercial roofing page for low-slope work. Washington-wide and Seattle-wide search pages follow, and the prices and free audit pages close the list for a King County roofing company planning its search work.

Will your leak repair page be current before November, Sea-Tac’s wettest month?

Share your site and the King County cities you roof in. A written review comes back from the founder, free, with the first fixes in order.